16+ Hyundai Elantra Fuse Box. Main fuse if the main fuse is blown, it must be removed as follows: Does anyone know if its possible to replace this switch.
Remove the nuts shown in the picture. It’s best to use a plastic piece to avoid scratches but you can get away with a flathead if you. (the a/c is not working, so it was no using it to test the fans).
Contents
- 1 Does Anyone Know If Its Possible To Replace This Switch.
- 2 For Anyone Potentially Reading This In The Future:
- 3 It's Best To Use A Plastic Piece To Avoid Scratches But You Can Get Away With A Flathead If You.
- 4 (The A/C Is Not Working, So It Was No Using It To Test The Fans).
- 5 I Have Flipped This Switch To Off And On A Couple Times Hoping It Would Reseat However It Is Still Sensitive To The Touch.
Does Anyone Know If Its Possible To Replace This Switch.
Remove the nuts shown in the picture. Thanks so much @az2008 ! 1997 lantra/elantra fuse box diagram jump to latest 11k views 2 replies 3 participants last post by mjsalloum jun 16, 2020
For Anyone Potentially Reading This In The Future:
Main fuse if the main fuse is blown, it must be removed as follows: If the fuse seems stuck, just get. I observed that the sensor 1 fuse was missing (obviously this was.
It's Best To Use A Plastic Piece To Avoid Scratches But You Can Get Away With A Flathead If You.
Disconnect the negative battery cable. Pull door strip away using both hands then pry side cover starting from the bottom. 1 x fuse box as the picture shown.
(The A/C Is Not Working, So It Was No Using It To Test The Fans).
Hi all, i have a 2013 hyundai elantra limited that i recently replaced the flexible steering coupler on. The fuse was a punk to remove, but it is definitely the culprit. My first stop was to check the fuse box.
